HVAC Maintenance Plan In Mesquite, TX
HVAC Maintenance Plan in Mesquite, Dallas, Forney, TX, and Surrounding Areas
Our skilled technicians service any brand of air conditioner, gas furnace, and heat pump. Keep your unit running smoothly with a Lavender AC & Heating’s Silver Maintenance Plan.
Air Conditioning Maintenance Includes:
- Check the refrigerant charge including suction line pressure and liquid Line pressure
- Take the TD across the coil including return air temp and supply air temp
- Look for signs of a refrigerant leak
- Inspect the suction line insulation
- Test the capacitors
- Inspect contactor
- Test the incoming line voltage
- Inspect the wiring
- Test the relays and switches
- Test the pressure switches
- Blow out the drain line
- Check all motor amperages
- Inspect the equipment disconnect
- Remove debris around condenser
- Rinse the condenser coils water only (acid extra)
- Check the drain for proper fall
- Proper float switch operation
- Check the secondary drain pan
- Inspect the evaporator coil
- Replace Standard 1in filter (20x25x1,20x20x1,16x25x1,14x25x1,) All other size extra & only one per unit
- Inspect the duct system
- Insure there are no code violations
Gas Furnace Maintenance Includes:
- Clean and/or check the gas burners
- Check and/or clean the pilot tube
- Check the igniter for proper resistance and function
- Test the flame sensor
- Check the blower motor amps and speed
- Evaluate the temperature rise
- Inspect the heat exchangers for hole
- Check for proper combustion
- Clean out and inspect the pressure switch tubing
- Evaluate the pressure switch operations
- Make sure that the flue gasses are venting properly
- Test all of the limit and roll out switches
- Inspect the gas pipe plumbing and check for leaks
- Set manifold gas pressures
- Check the gas input rate
- Light the pilot and check the thermocouple
- Inspect all of the wiring
- Perform combustion analyst
- Check the pilot safety thermocouple (electronic ignition)
- Make sure that there are no code violations
- Check the safety interlock switch
- Test the combustion fan motor and check amps
- Make sure that there is proper combustion air
- Inspect the duct system
- Perform a carbon monoxide test
Heat Pump Maintenance Includes:
- Check the refrigerant charge
- Check the temperature rise across the coil
- Inspect the coils for cleanliness, leaks, or deficiencies
- Test the defrost cycle
- Make sure the reversing valve is working properly
- Test the auxiliary heat staging
- Check the emergency heat operation
- Test and inspect the thermostat operation
- Check the capacitors
- Inspect the contactor switch
- Test the relays, switches, and control board
- Perform a visual check for refrigerant leaks
- Analyze the air flow
- Test the fan motor amperage
- Check the filtration system
- Insure proper return air sizing
- Standard 1in filter (20x25x1,20x20x1,16x25x1,14x25x1,) only one per system 4in Filters are Extra
- 20% Parts & Labor Discount
- 1yr Part & Labor Warranty
- $95.00 Service Fee
- 2 Visits A Year
*If you cancel this plan, you will be removed from Lavender AC & Heating’s customer list
